Dear All,
Its been a long time.
But finally we had the down time and we resolved our issue.
Issue was with UMASK.
Set it to standard 022 and it worked fine.
Thanks to you all.
Regards,
Vikas
↧
Re: JAVA stack wont come up after complete restart.....
↧
Re: SAP ERP EHP with SAP Hana database
Hello Divyanshu,
Yes, I already understand that! That´s not a point here! My doubts is to understand the nomenclature of those products and realize if there are some differences between this products, because I see at SAP Marketplace in SAP ERP EHP installation software at http://service.sap.com/swdcand also in PAM, the name EHP6 FOR SAP ERP 6.0 ON HANA and I don´t see the same name for EHP7 (it only show the option SAP ERP 6.0 EHP7 (not "on Hana"), what does this mean?
Other thing that is for me strange is, if you search in PAM the ERP EHP6 product, the "EHP6 FOR SAP ERP 6.0 ON HANA", why it show all the database possibilites to install in "Technical Release Information" --> "Database Platforms" tabs!!! If this is only for HANA DB ("On Hana") why it shows other types of databases (like Oracle; SQL Server; DB2...)?
Thank you,
samid raif
↧
↧
Direct SAP table update issues
Hello Experts,
Currently, in my customer system i see one custom program which is updating SAP standard table (SCM EWM) directly using below statement.
"update /SAPAPO/MATLWH set rsqty = zmax_qty where matid = mat_wa_chunk-matid and scuguid = mat_wa_chunk-entitled_id."
I see that program is there in production from last almost 2 years and that is a product quantity update program which has to run periodically.
As per my knowledge, this is not at all acceptable. Can you please share me your thoughts, what kind of problems will occur and pre-defined
errors with direct data base table update?
What should we do now on this?
Thank you in advance.
↧
Re: Error in NW 7.4 stack upgrade phase"PREP_PRE_CHECK/PROFREAD"
Hi sanjay,
Can you debug this function module with se80 and sm30 ?
Please check the evaluation.
Regards
Divyanshu
↧
Dialog Instance Installation
Hi,
We are having SAP ECC 6.0 on platform AIX 6.1 Oracle 10g and SAP Kernel 720 patch 300.
We are trying to add Dialogue Instance to add Application Server for my production System.
We are having SapInst for Kernel 700 release (NW 7.0 SR3 UC-Kernel 7.00 AIX 64bit: D51033506--->I don't know why cannot find 'NW 7.0 SR3 UC-Kernel 720 AIX 64bit).
I trying to install with this SAPINST and the installation overwrite my production System Kernel back to 700_REL--->Note 1701575 tell me how to invoid overwrite the CI Kernel, but I don't know it will be succesful.
From Where we able to download Installation files for dialogue instance.
Pl. guide us according to Install Dialogue Instance.
Now I have two solution for DI installation as below, could you pls confirm it's ok ? or give me any other advise .
Solution1:
Install with NW7.0 Kernel7.0, but don’t unpack Kernel Archive, directly upgrade
the Patch300 of Kernel 720 to New DI(or need upgrade to Kernel 720 first and
then apply 720 Patch 300 ?).
Solution2:
Install with 720 UC Kernel for SWPM SP04-AIX 64(51047205_3), and then don’t
need upgrade Kernel patch for New DI ?
Thanks,
Mic
↧
↧
Quicksizer for SAP BW - Fields % master data, Distinct values
Hello,
I'm using the SAP Quicksizer tool to size a SAP BW 7.31 system.
For SAP BW, Quicksizer demands five tables to be input, each one referring to an aspect of the sizing. Table 4 refers to the definition of Infocubes. In this table, the meaning and use of some columns aren't clear to me. The columns are "% master data", "Distinct values", "% dist. val. low", "% distinct val. 1".
Looking at the help provided by the quicksizer tool itself, we see the following explanations:
- % MD
Part of master data on total InfoCube size with the assumption data is the sum of master data and InfoCube data. If you know that you have shared master data, you can enter "0" if you have already considered it once. - Distinct values
Average number of different values over all key figure columns. - % DVL
Percentage of key figures columns with very low number of distinct values (sparse). - % DV1
Percentage of key figure columns with one distinct value (super sparse).
Regardless of the explanation given, I am still not able to figure out the correct interpretation of those fields, and how should I fill them. I looked for other questions and official sap documents, but with no success. Therefore, I would much appreciate with someone could help me with that. Below are some doubts I had when filling the questionnaire.
Thank you,
Péterson
--
Here are some questions:
- % MD
How should I calculate this? Is this the size of dimension tables compared to the size of the fact table? Or is this the size I expect the master data referenced in the fact table to occupy in comparison with the size of the cube itself?
- Distinct values
Is this an absolute value? Shouldn't it be the distinct values of all characteristics columns? How should I calculate or infer this?
- % DVL
Shouldn't this refer to the characteristics columns?
- % DV1
Shouldn't this refer to the characteristics columns?
Finally, those fields aren't mandatory. How will they affect the final result output by quicksizer?
↧
Re: *** ERROR => zdate_gettime: Service for ABAP time in EMERGENCY MODE
Hi Raghu,
Were you able to resolve this issue?
Thanks
Sajid
↧
How to Configure NWBC, ESS MSS
Dear Consultants,
Can anyone tell how to install ESS MSS servers in the present SAP Server, We want to use NWBC to use.
Naresh.KM
↧
Re: prerequisite check of database instance installation failed on Solaris
Dear Ashish,
Sorry for the late response, we have raised the same with SAP and SAP also suggested to ignore the Error.
Regards,
Praveen.
↧
↧
Re: IDES EHP7
Hi Goluef,
I had the same error. Please configure your transport system in client 000 via transaction STMS. The program was looking for a rfc destination in table rfcdes starting with the characters "TMS".
This solved it for me.
Regards
Lutz
↧
Re: Text Missing from Dialogue Box
Hi,
Technical info also not shows; finally removed all the JAVA and SAPGUI; restores system to Earlier Stage and Re installed the JAVA and SAPGUI720 Again; then F1 Option woks this Time !
On more observation found for T-Code SE80, Please find the Screen-Shots . . .
↧
Re: Text Missing from Dialogue Box
Perhaps, It's JRE and GUI combination which is not working correctly for your frontend machine.
Can you share some details like OS, processor, machine type, 32/64 bit, windows version, java version etc to find a right combination.
Regards,
Divyanshu
↧
Re: Alternative to replace use of Table BDCP
Hi Deepak,
Thanks for your reply. You gave very informative reply. Actually we are using PANAYA tool to update a system and PANAYA says that "SAP table BDCP which is used in START-OF-SELECTION is obsolete in SAP ERP 6.0 EHP7 SP Stack 4. Data in this table is not maintained any more" and recommend to "Search for an alternative and replace use of table BDCP". I will use BDCP2 as an alternative. I will update on the community if this is the right alternative or not.
Thanks and best regards.
Fahad
↧
↧
Re: How to Configure NWBC, ESS MSS
Hi Naresh,
With the limited information you provided, suggestion would be to check below documents to begin your ESS/MSS setup
How to Configure ESS and MSS in Portal..
Hope this helps.,
Regards,
Deepak Kori
↧
Re: How to Configure NWBC, ESS MSS
please check below SCN thread if they are helpful for your case.
http://scn.sap.com/thread/2132615
https://scn.sap.com/thread/3289586
Best Regards
Ashish
↧
Re: SAP WEB Dispatcher for Two systems
Did you check this :
↧
Re: Oracle upgrade-RUNINSTALLER issue
Kindly follow SAP Note 1431796 - Oracle 11.2.0: Troubleshooting the Software Installation
and link http://kamranagayev.com/2011/03/27/step-by-step-installing-oracle-11gr2-on-oracle-solaris-10/
Regards,
Gaurav
↧
↧
Re: SAP WEB Dispatcher for Two systems
this link for configure web Gui.
i already configured on Both ABAP systems i want access both system via SAP WED Dispatcher.
↧
Re: extend memory em/initial_size_MB to 20GB
Hello Hong,
the initial amount 'em/initial_size_MB' of extended memory will be allocated first, and it will be extended if needed until EM/TOTAL_SIZE_MB is reached. What is the value for EM/TOTAL_SIZE_MB in the affected system? It will not make much sense to increase only em/initial_size_MB, the maximum amount of extended memory is restricted by EM/TOTAL_SIZE_MB.
Reg. RAM - an estimation is
RAM+swap = heap + extended memory
regards,
Alwina
↧
Re: Oracle upgrade-RUNINSTALLER issue
Dear Gaurav,
The below one is 11ginstall_11202.log details:
. 11ginstall.sh - Oracle Database Software Installation Script
. Version 11.2.0.2.0 Release Date 2011-10-18 Patch Level 029 (rel)
. Copyright (c) Oracle Corporation 2010, 2011. All Rights Reserved.
. Reference SAP note: 1524205
. Supported Oracle Database Release: 11.2.0.2.0
.
. Host : rcomsapp80upg
. Platform : SunOS sun4u (64-bit)
. Date : 2014-07-17 07:13:18
. User : orap45
. Logfile : /oracle/P45/11ginstall_11202.log
.
. 11ginstall.sh was called with the following options (command line):
. -oracle_stage /oracle/stage/11202/database -ignoreSysPrereqs -executePrereqs
.
.
. Performing pre-installation checks ...
.
. (OK) - Got value for <DB_SID> from environment.
. (OK) - Got location for Oracle base from environment.
. (OK) - Got location for Oracle stage from '-oracle_stage' option.
. (OK) - Oracle base = /oracle
. (OK) - Oracle base location /oracle exists.
. (OK) - Installation location /oracle/P45/11202 does not exist.
. (OK) - Run-time location /oracle/P45/112_64 does not exist.
. (OK) - Inventory pointer file /var/opt/oracle/oraInst.loc exists.
. (OK) - Group dba is defined.
. (OK) - Group oper is defined.
. (OK) - OUI version in stage is 11.2.0.2.0.
. (OK) - New response file /oracle/P45/.11ginstall_11202.rsp created.
.
. Pre-installation checks completed.
.
.
. --- Begin of OUI response file /oracle/P45/.11ginstall_11202.rsp ---
.
###############################################################################
## Copyright (c) Oracle Corporation 2010, 2011. All Rights Reserved.
##
## Generated by 11ginstall.sh - Oracle Database Software Installation Script
## Version 11.2.0.2.0 Release Date 2011-10-18 Patch Level 029
##
## Reference SAP note: 1524205
## Supported Oracle Database Release: 11.2.0.2.0
## Platform: SunOS sun4u
## Date : 2014-07-17 07:13:18
###############################################################################
oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0
oracle.install.option=INSTALL_DB_SWONLY
ORACLE_HOSTNAME=rcomsapp80upg
UNIX_GROUP_NAME=dba
SELECTED_LANGUAGES=en
ORACLE_HOME=/oracle/P45/11202
ORACLE_BASE=/oracle
oracle.install.db.InstallEdition=EE
oracle.install.db.EEOptionsSelection=true
oracle.install.db.optionalComponents=oracle.rdbms.partitioning:11.2.0.2.0,oracle.rdbms.rat:11.2.0.2.0
oracle.install.db.DBA_GROUP=dba
oracle.install.db.OPER_GROUP=oper
oracle.install.db.isRACOneInstall=false
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
DECLINE_SECURITY_UPDATES=true
oracle.installer.autoupdates.option=SKIP_UPDATES
#INVENTORY_LOCATION=
.
. --- End of OUI response file /oracle/P45/.11ginstall_11202.rsp ---
.
.
. Environment settings:
.
. DB_SID = P45
. DISPLAY = localhost:10.0
. ORACLE_BASE = /oracle
. ORACLE_STAGE = not set
.. Installation Settings:
.
. Installation log file = /oracle/P45/11ginstall_11202.log
. Oracle Release = 11.2.0.2.0
. Oracle stage location = /oracle/stage/11202/database
.
. Oracle base location = /oracle (exists)
. Oracle home install. location= /oracle/P45/11202
. Oracle home run-time location= /oracle/P45/112_64
. Inventory group = dba
. SYSDBA group = dba
. SYSOPER group = oper
.
. OUI Settings:
.
. OUI version = 11.2.0.2.0
. OUI temporary directory = /oracle/P45/.11ginstall_11202.tmp
. OUI response file = /oracle/P45/.11ginstall_11202.rsp
. OUI output log file = /oracle/P45/.11ginstall_11202.oui
. OUI options = -waitForCompletion -ignoreSysPrereqs -executePrereqs
.
. Post Installation Settings:
.
. Update OPatch/MOPatch = -opatch_update
. Check inventory =
. --- Oracle Universal Installer command line ---
. LANG=C TMP=/oracle/P45/.11ginstall_11202.tmp /oracle/stage/11202/database/runInstaller -responseFile /oracle/P45/.11ginstall_11202.rsp -wait
ForCompletion -ignoreSysPrereqs -executePrereqs | tee /oracle/P45/.11ginstall_11202.oui
. --- Oracle Universal Installer command line (end) ---
.
. (INFO) - Starting Oracle Universal Installer in interactive mode - please wait ...
.
.
. --- Begin of OUI output ---
.
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 180 MB. Actual 9192 MB Passed
Checking swap space: must be greater than 150 MB. Actual 107068 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /oracle/P45/.11ginstall_11202.tmp/OraInstall2014-07-17_12-43-19PM. Please wait ....
.
. --- End of OUI output ---
.
.
.
. (INFO) - Software installation prerequisite checks finished.
.
. Performing post-installation clean up tasks ...
. (OK) - OUI temp. directory /oracle/P45/.11ginstall_11202.tmp removed successfully.
. (OK) - OUI output log file /oracle/P45/.11ginstall_11202.oui removed successfully.
. Post-installation clean up tasks completed.
. See log file /oracle/P45/11ginstall_11202.log for details.
. Exiting with exit code 4.
Project entries:
P45
projid : 430
comment: "SAP System P45-SAPHRTA10"
users : orap45
p45adm
root
sapr3
groups : dba
sapsys
attribs: process.max-file-descriptor=(basic,65536,deny)
process.max-sem-nsems=(priv,2048,deny)
project.max-sem-ids=(priv,1024,deny)
project.max-shm-ids=(priv,1024,deny)
project.max-shm-memory=(priv,18446744073709551615,deny)
Regards
Maruthi V
↧